
Tub to Shower Conversion Cost by Shower Type
The kind of shower that replaces the tub sets most of the cost. A prefab stall is fastest; tile and a curbless entry cost more because they take more labor.
- Prefabricated shower stall
- $2,000 – $6,000
- Walk-in shower
- $5,000 – $12,000
- Tiled shower
- $6,000 – $12,000
- Curbless shower
- $8,000 – $15,000
National market ranges from This Old House's tub-to-shower conversion cost guide, updated March 4, 2026. Not quotes from CM Bathroom Remodel Dallas.
What Each Part of the Conversion Costs
A conversion is several jobs in a row: the tub comes out, the plumbing changes, a waterproof shower is built and the glass goes in. These are the market costs for each part.
| Part of the job | Market cost | When it applies |
|---|---|---|
| Tub removal and disposal | $300 – $1,200 | Every conversion |
| Moving the drain line | $900 – $1,100 | When the shower drain sits in a new spot |
| New or upgraded shower valve | $700 – $1,200 | When the old tub valve is replaced |
| Framed glass door | $400 – $1,200 | Instead of a curtain |
| Frameless glass door | $1,200 – $3,000 | For a clean, open look |
| Grab bar, installed | $150 – $500 each | For safety, now or later |
| Fold-down shower seat, installed | $300 – $800 | When someone needs to sit |
Tub removal and disposal
- Market cost
- $300 – $1,200
- When it applies
- Every conversion
Moving the drain line
- Market cost
- $900 – $1,100
- When it applies
- When the shower drain sits in a new spot
New or upgraded shower valve
- Market cost
- $700 – $1,200
- When it applies
- When the old tub valve is replaced
Framed glass door
- Market cost
- $400 – $1,200
- When it applies
- Instead of a curtain
Frameless glass door
- Market cost
- $1,200 – $3,000
- When it applies
- For a clean, open look
Grab bar, installed
- Market cost
- $150 – $500 each
- When it applies
- For safety, now or later
Fold-down shower seat, installed
- Market cost
- $300 – $800
- When it applies
- When someone needs to sit
Figures from This Old House's 2026 tub-to-shower conversion cost guide. Your price depends on your bathroom and is set at the quote.
What Changes in a Dallas Slab Home
Most Dallas homes sit on a concrete slab, and that shapes a tub to shower conversion. A tub drain sits at one end of the tub; a shower drain often sits in the middle or along one wall. Moving it means cutting the concrete, moving the pipe and patching the floor.
A standard tub alcove is about 60 inches long, so a walk-in shower usually fits without moving walls. That is why the old hall-bath tub in a Mesquite or Farmers Branch ranch is often the simplest place to put a walk-in shower.
Hidden costs to plan for
In This Old House's January 2026 survey of 1,000 homeowners who finished a bathroom renovation, about 70% ran into at least one hidden cost. The most common were structural repairs (38%), water damage (32%) and unplanned plumbing upgrades (29%). The same guide suggests setting aside 10% to 20% of the budget for surprises.
- Water damage: a leaking tub surround can rot the wall framing or subfloor behind it.
- Old drains: cast iron or galvanized lines in older homes may need replacing once exposed.
- Out-of-square walls: older alcoves can need shimming or new framing before tile.
How a Tub to Shower Conversion Runs
A tiled tub to shower conversion in a Dallas home usually takes one to two weeks of work, plus a later visit for the glass.
- 1. Quote: we measure the alcove and check the plumbing and the walls at your house, for free.
- 2. Demolition: the tub and surround come out, and we check the framing and drain.
- 3. Plumbing: the drain and valve move or get replaced as needed.
- 4. Waterproofing: a sloped shower pan and a membrane go on the floor and walls.
- 5. Tile and glass: tile goes on, and the glass is measured and set once the tile cures.
See our tub to shower conversion service for what is included.
How to Keep the Conversion Cost Down
- Keep the drain where it is: in a slab home, this skips the concrete work.
- Use the existing alcove: a shower the size of the old tub needs no wall changes.
- Pick porcelain tile: it costs less than stone and needs no sealing.
- Choose a fixed glass panel: one panel with no door costs less than a hinged door.
- Add blocking now, grab bars later: solid wood behind the tile costs little and lets you add bars when you need them.
“Our primary bathroom had a cramped shower and a huge tub we almost never used. We remodeled the space around what we actually needed, and the new walk in shower has completely changed the room. The layout feels larger now without adding any square footage.”
Asked often
Tub to Shower Conversion Questions
Will removing my tub hurt resale?
It can if it is the only tub in the house, since some buyers, families with young children especially, want one. Converting the tub in a second bathroom avoids that. Our walk-in shower vs tub guide covers the trade-offs.
Can the new shower be bigger than the tub?
Yes, if the bathroom has room to borrow, such as a linen closet or the space beside the tub. That means moving a wall and costs more than a shower the size of the old tub.
How long does a tub to shower conversion take?
A tiled conversion usually takes one to two weeks of work in a Dallas home, plus a separate visit for the glass once the tile has cured.
Do I need a permit to convert a tub to a shower?
When the drain or valve moves, usually yes. Each city in the Dallas area issues its own permits, and we tell you at the quote what your project needs.
Is the conversion quote free?
Yes. CM Bathroom Remodel Dallas measures and prices the conversion at your house for free.
Sources
- This Old House, "How Much Does Tub-to-Shower Conversion Cost? (2026 Guide)", updated March 4, 2026, including its January 2026 survey of 1,000 homeowners.